degdrive DGI900 - Description of Function Codes; Basic Parameters (Group P0); Fault and Protection (Group PA)

98
frequency in
torque control
mode
P9.30 Acceleration
time of torque
control
0.00s～65000s 0.01s 0.00s ○
P9.31 Deceleration
time of torque
control
0.00s～65000s 0.01s 0.00s ○
Group PA: Fault and Protection
Function
Code
Parameter
Name
Setting Range Minimum
Unit
Default Property
PA.00 Motor overload
protection
selection
0: Disabled
1: Enabled
1 ○
PA.01 Motor overload
protection gain
0.20～10.00 1.00 ○
PA.02 Motor overload
protection
coefficient
50%～100% 80% ○
PA.03 Over voltage
stall gain
0～100 0 ○
PA.04 Over voltage
stall protective
current
120%～150% 130% ○
PA.05 Over current stall 0～100 20 ○