degdrive DGI900 - Output Terminals (Group P4)

79
P3.43 AI as valid status
selection of DI
0：High level valid
1：Low level valid
Unit’s digit：VI
Ten’s digit：CI
111 111 ×
Group P4: Output Terminals
Function
Code
Parameter
Name
Setting Range Minimum
Unit
Default Property
P4.00 FM terminal
output mode
0：Pulse output (FMP)
1：Switch signal
output（FMR）
1 0 ○
P4.01 FM
function(open-
collector output
terminal)
0：No output
1：AC drive running
2：Fault output (stop)
3：Frequency-level detection
FDT1 output
4：Frequency reached
5：Zero-speed running(no
output at stop)
6：Motor overload pre-
warning
7：AC drive overload pre-
warning
8：Set count value reached
9：Designated count value
reached
1 0 ○
P4.02 Relay function
T/A-T/B-T/C
1 2 ○
P4.03 Extension card
relay
function（R/A-
R/B-R/C）
1 0 ○
P4.04 DO1 function
selection
(Reserved)
1 1 ○