Delta AH500 - Page 372

AH500 Module Manual
10-10
Delta network products related with DeviceNet bus:
Product picture
Type
Function
AH10DNET-5A
AH10DNET-5A, a DeviceNet
module, running on the I/O slot of an
AH500 series main backplane can
work as the DeviceNet master or
slave.
AHRTU-DNET-5A
AHRTU-DNET-5A, a remote I/O
module, is used for connecting an
AH500 series DI/DO module, AI/AO
module and 10SCM module to the
DeviceNet network.
DVPDNET-SL
DVPDNET-SL, a DeviceNet module,
running on the left of an S series PLC
can work as the DeviceNet master or
slave.
RTU-DNET
RTU-DNET, a remote I/O module,
is used for connecting S-series
DI/DO module, AI/AO module and
other device to the DeviceNet
network.
IFD9502
Used for connection between the
DeviceNet network and
electromechanical equipment such
as AC motor drive, PLC,
temperature controller, servo drive,
HMI, user-defined device.
IFD6503
The bus data analysis tool, with one
end of CAN interface and the other
end of USB interface can be used
for getting the CAN bus data or
sending the data to the CAN bus
node. It is used with the Netview
Builder software together.
E series AC motor
drive
Used for connecting the AC motor
drive to the DeviceNet network via
CME-DN01 card