Delta AH500 - Page 373

Chapter 10 DeviceNet Communication Module AH10DNET
10-11
Product picture
Type
Function
CMC-DN01
Used for connecting the C2000 series
AC motor drive to the DeviceNet
network
DN-02
Used for the connection between the
DeviceNet network and AC motor
drive.
DVPDT01-S
Used for the connection between
the DeviceNet network and S series
PLC.
DVPDT02-H2
Used for the connection between the
DeviceNet network and DVP-EH2
series PLC.
TAPCP01
The CAN bus topology tapping box
with the 120 ohm resistor enclosed
which is effective or not via its
switch.
TAP-CN01
The CAN bus topology tapping box
with the 120 ohm resistor enclosed
which is effective or not via its
switch.
TAP-CN02
The CAN bus topology tapping box
with the 120 ohm resistor enclosed
which is effective or not via its
switch.