Delta AH500 - Page 441

Chapter 11 DeviceNet Remote I/O Module AHRTU-DNET
11-15
Delta network products related with DeviceNet bus:
Product picture Type Function
AH10DNET-5A
AH10DNET-5A, a DeviceNet module,
running on the I/O slot of AH500 series main
rack can work as the DeviceNet master or
slave.
AHRTU-DNET-5A
AHRTU-DNET-5A, an AH500 series remote
I/O data exchange module, is used for
connecting AH500 series DI/DO module,
AI/AO module and AH10SCM-5A module to
the DeviceNet network.
DVPDNET-SL
DVPDNET-SL, a DeviceNet module,
running on the left of S series PLC CPU can
work as the DeviceNet master or slave.
RTU-DNET
RTU-DNET, an S series remote I/O module,
is used for connecting S-series DI/DO
module, AI/AO module and other device to
the DeviceNet network.
IFD9502
It converts DeviceNet to Modbus gateway,
which can connect the equipment with the
RS-232 port or RS485 port complying with
the Modbus protocol to the DeviceNet
network.
IFD6503
The bus data analysis tool, with one end of
CAN interface and the other end of USB
interface can be used for getting the CAN
bus data or sending the data to the CAN bus
node. It is used with the Netview Builder
software together.