Delta AH500 User Manual

Chapter 11 DeviceNet Remote I/O Module AHRTU-DNET
11-35
Indicates that the module connected to the slot of the rack does not match that
configured in the software or the current module has been removed from the slot
though it matched that configured in the software previously
Indicates that the slot in the software is empty but actually, it is inserted by other
module on the rack
On the monitor interface, right click the module icon and select “Run” or “Stop” to change the
operational state of the I/O module.

Delta AH500 Specifications

General

Brand	Delta
Model	AH500
Category	Controller
Language	English