Delta AH500 - Page 664

AH500 Module Manual
14-34
Name Setting Explanation
1V~+5V
0mA~20mA
4mA~20mA
Mode: -5V~+5V
Mode: 0V~+5V
Mode: 1V~+5V
Mode: 0mA~20mA
Mode: 4mA~20mA
CH0~CH3 Input
average time
0x0A Average times setting for CH0~ CH3 input
CH0~CH1 output
hold
disable/enable
Output hold options:
Enable: the output of other I/O modules of
AHRTU-PFBS-5A is held when some I/O module
has a fault and the master is disconnected or
stops running.
Disable: the output of other I/O module
s of
AHRTU-PFBS-5A is cleared to 0 when some I/O
module has a fault and the master is
disconnected or stops running.
 Setting of AH04PT-5A
After configuring AH04PT-5A, refer to Figure 8 for the related parameters setting.
Figure 8