Digi TransPort WR11 - Page 135

Using the command-line interface Application commands
Digi TransPort® Routers User Guide
135
et h 0 descr “ Local LAN”
Because of the space between Local and LAN, the wording is enclosed in double quotes.
To set an IP address on 192.168.1.1 on Ethernet 0:
et h 0 i paddr 192. 168. 1. 1
To set an IP address of 172.16.0.1 on Ethernet 1:
et h 1 i paddr 172. 16. 0. 1
To enable the DHCP client on Ethernet 2:
et h 2 dhcpcl i on