Digi TransPort WR11 - Configure DHCP Options

Configuring DHCP servers Configure DHCP options
Digi TransPort® Routers User Guide
404
Configure DHCP options
É Web
1. Go to Configuration > Network > DHCP Server >DHCPOptions.
The DHCP Options pages allow custom (or non-standard) DHCP options to be configured and
sent to the DHCP client when requesting an IP address and other DHCP parameters. This is
useful for devices such as IP telephones that use specific strings. On the web page, these (up
to ten) options are configured using a table.
2. Enter DHCP options in the table:
Option
The DHCP option number.
Data type
The data type for the option and can be any one of the following; 1, 2, or 4 byte value, IPv4
address, text string, or hexadecimal data.
Value
The actual data that will be sent in the DHCP option message.
3. Click Apply.
Command line
Command Instance Parameter Values Equivalent web parameter
dhcpopt n optnb 0-2147483647
Default 0
Option