Digi TransPort WR11 - Use Comments in Configuration Files

Performing device administration tasks Manage files
Digi TransPort® Routers User Guide
919
Use comments in configuration files
You can use comments in configuration files to make them easier to read. The shaded comments are
prefixed with a # symbol. In the example below, the info_asy_add parameters are for illustration
purposes only and are not the actual ASY port numbers in use.
<DR6410- H0A>
#St ar t of DR6410- H0A conf i g
<NOVATEL_3G>
#St ar t of Novat el speci f i c conf i g
modemcc 0 asy_add 7
modemcc 0 i nf o_asy_add 8
#End of Novat el speci f i c conf i g
</ NOVATEL_3G>
<OPTI ON_3G>
#St ar t of Opt i on speci f i c conf i g
modemcc 0 asy_add 7
modemcc 0 i nf o_asy_add 9
#End of Opt i on speci f i c conf i g
</ OPTI ON_3G>
<SI ERRA_3G>
#St ar t of Si er r a speci f i c conf i g
modemcc 0 asy_add 7
modemcc 0 i nf o_asy_add 10
#End of Si er r a speci f i c conf i g
</ SI ERRA_3G>
#End of DR6410- H0A conf i g
</ DR6410- H0A>
<DR6410- E0A>
#St ar t of DR6410- E0A conf i g
modemcc 0 asy_add 7
modemcc 0 i nf o_asy_add 11
#End of DR6410- E0A conf i g
</ DR6410- E0A>
#Rest of gener i c conf i g goes bel ow her e
modemcc 0 apn i nt er net ”
et h 0 i paddr 192. 168. 0. 99