Digi TransPort WR11 - Multi Protocol BGP Entity; Equivalent Cross Virtual Routing Entry

Configuring IP routing and forwarding Configure Virtual Routing and Forwarding (VRF)
Digi TransPort® Routers User Guide
464
Attribute
name Attribute description Scheme
Polling
interval
Next Hop
IP Address
Next hop IP address IPCore Configuration
Type Route entry type
(Null, Other, Invalid, Direct, Indirect, Static)
IPCore Configuration
Routing
Protocol
Type
Routing protocol type
(Null, Other, Local, Network Managed, ICMP, EGP, GGP,
Hello, RIP, IS-IS, ES-IS, Cisco IGRP, BBN, SPF, IGP, OSPF,
BGP, EIGRP)
IPCore Configuration
Outgoing
Interface
Name
Outgoing IP interface name IPCore Configuration
Multi protocol BGP entity
The Multi Protocol BGP Entity object describes the Border Gateway Protocol (BGP) component of a
MPLS-BGP based VPN router. It is bound by its Logical Sons attribute to all Virtual Routing Forwarding
(VRF) Entity objects among which it is routing IP packets.
Attribute
name Attribute description Scheme
Polling
interval
BGP
Identifier
Border Gateway Protocol (BGP) identifier IPCore Configuration
Local
Autonomous
System
Local peer autonomous system IPCore Configuration
Cross
Virtual
Routing
Table
Array of Equivalent Cross Virtual Routing Entry IPCore Configuration
BGP
Neighbors
Array of BGP neighbor entries IPCore Configuration
Logical Sons Array of all VRF Entity objects among which this Multi
Protocol BGP Entity is routing IP packets
IPCore Configuration
Equivalent Cross Virtual Routing Entry
The Equivalent Cross Virtual Routing Entry and Cross Virtual Routing Entry objects describe the first
dimension of a cross virtual routing table, as an array of Cross Virtual Routing Entry objects sharing a
single Virtual Routing Forwarding (VRF) Entity destination.