Hardware features TransPort WR11 hardware features
Digi TransPort® Routers User Guide
27
4. SIM door: Encloses the SIM sockets. The SIM door must be opened to install the SIM cards. For
installation details, refer to the Quick Start Guide that came with your device.
Note To open the SIM door, slide the SIM door out using your finger.
5. Reset button:Resets the router to factory defaults. See Reset the router to factory defaults.
6. SIM sockets: SIM 1 and SIM 2 are for use with the SIMs.
7. Primary LTE antenna connector: This SMA female connector connects the device’s primary
cellular antenna.
8. Secondary LTE antenna connector: This SMA female connector connects the device’s
secondary cellular antenna.
TransPort WR11 XT
1. LAN port: Connects the device to a 10/100 base-T Local Area Network (LAN). The port can
perform auto-sensing for speed and wiring, so it can accept straight-through or cross-over
cable connections.
2. Power connector: This locking power connector connects the device to a power source. The
connector should be inserted and rotated to lock in place. Center pin is positive.
To Next Page
Loading...
