Digi TransPort WR11 - Advanced Dynamic DNS Parameters

Configuring DNS Configure Dynamic DNS (DynDNS)
Digi TransPort® Routers User Guide
423
Command Instance Parameter Values
Equivalent
web
parameter
dyndns 0 system Blank, statdns,
custom
DynDNS DDNS
System
dyndns 0 ifent Blank,ETH,PPP When default
route/interface
x,y becomes
active, send
DDNS update
dyndns 0 ifadd 0 -2147483647 When default
route/interface
x,y becomes
active, send
DDNS update
dyndns 0 wildcard 0, 1, 2
0=Disable
wildcards
1=Enable
wildcards
2=No change
to service
settings
Use Wildcards
Advanced Dynamic DNS parameters
Typically, the Advanced Dynamic DNSparameters do not require d changing from their defaults.
Note Before configuring dynamic DNS or any of these parameters, it is recommended that you view
the information and resources available at the website http://dyn.com.
É Web
Go to Configuration > Network > Dynamic DNS>Advanced.
Update interval d days
The number of days between dynamic DNS updates.