Digi TransPort WR11 - Page 422

Configuring DNS Configure Dynamic DNS (DynDNS)
Digi TransPort® Routers User Guide
422
n Disable wildcards
n Enable wildcards
n No change to service settings
When enabled, the Dynamic DNS service will match DNS requests of the form *.hostname
where * matches any text. For example, if Hostname1 was set to site.dyndns.com and
wildcard matching was enabled, then www.site.dyndns.com would resolve to the interface
address.
3. Click Apply.
Command line
Command Instance Parameter Values
Equivalent
web
parameter
dyndns 0 provider Service
Provider
dyndns 0 provider_hostname Service
Provider
Hostname
dyndns 0 hostname1 Up to 40
characters
Host and
Domain Name
(s)
dyndns 0 hostname2 Up to 40
characters
Host and
Domain Name
(s)
dyndns 0 hostname3 Up to 40
characters
Host and
Domain Name
(s)
dyndns 0 hostname4 Up to 40
characters
Host and
Domain Name
(s)
dyndns 0 hostname5 Up to 40
characters
Host and
Domain Name
(s)
dyndns 0 port 0 - 65535 Destination
port #
dyndns 0 username Up to 20
characters
DynDNS User
Name
dyndns 0 password Up to 25
characters
DynDNS
Password