Digi TransPort WR11 - Qdl Command: Select Cellular Image to Load

Using the command-line interface Application commands
Digi TransPort® Routers User Guide
144
qdl command: Select cellular image to load
The qdl command selects which image to load onto a GOBI3000 cellular module. The syntax of the
command is:
qdl 0 f w <n>
where n can be 0-14. The meaning of each value is below. The default value is 0.
Instance Value
0 Generic UMTS
1 Verizon
2 Sprint PCS
3 IUSACELL
4 Bell Mobility
5 Alltel
6 Cingular Blue
7 Cingular Orange
8 T-Mobile
9 Docomo
10 Orange
11 Vodafone
12 Telefonica
13 Telital
14 OMH