Digi TransPort WR11 - Configure Advanced DHCP Options

Configuring DHCP servers Configure advanced DHCP options
Digi TransPort® Routers User Guide
402
Configure advanced DHCP options
É Web
1. Go to Configuration > Network > DHCP Server >DHCPServer for Ethernet n > Advanced
DHCP Options.
2. Set advanced DHCPoptions:
NetBIOS Name Server a.b.c.d
The IP address of the primary WINS server address.
Secondary NetBIOS Name Server a.b.c.d
The IP address of the secondary WINS server address.
TFTP Server Address a.b.c.d
The IP address of a TFTP server. Boot images mainly use this address.
FTP Server Address a.b.c.d (for WYSE Terminals)
The IP address of an FTP server and is a custom option for use with WYSE terminals.
FTP Root Dir (for WYSE Terminals)
The root directory for FTP transfers. This is also a custom option for use with WYSE terminals.
3. Click Apply.
Command line
Command Instance Parameter Values Equivalent web parameter
dhcp n NBNS Valid IP address
a.b.c.d
NetBIOS Name Server a.b.c.d
dhcp n NBNS2 Valid IP address
a.b.c.d
Secondary NetBIOS Name Server
a.b.c.d