Digi TransPort WR11 - Reset the Router to Factory Defaults; Using the Web Interface

Performing device administration tasks Reset the router to factory defaults
Digi TransPort® Routers User Guide
936
Reset the router to factory defaults
Using the web interface
É Web
1. Go to Administration > Factory Default Settings.
2. (Optional) Select Keep network settings option to preserve certain network settings after
the reset, including:
n Ethernet 0 IP address
n Ethernet 0 Mask
n Ethernet 0 Gateway
n Ethernet 0 DHCP Client
n Ethernet 0 DNS Server
n Default Route 0 Interface
n PPP 1 Username
n PPP 1 Password
n PPP 3 Username
n PPP 3 Password
n Mobile APN
n Mobile SIM PIN
3. Click Restore.
CAUTION! To avoid corrupting flash memory, do not remove power from the router
during this operation.
4. Click Reboot to reboot the router.