Digi TransPort WR11 - Configure VRF for Ethernet Interfaces; Configure VRF for GRE Tunnel Interfaces

Configuring IP routing and forwarding Configure Virtual Routing and Forwarding (VRF)
Digi TransPort® Routers User Guide
467
É Web
In the web interface, TransPort routers that have VRF support have additional configuration
parameters for Ethernet and GRE tunnel interfaces.
Configure VRF for Ethernet interfaces
For Ethernet interfaces, these parameters are on Configuration > Network > Interfaces > Ethernet
> ETH n:
VRF
Associates the interface with a particular Virtual Routing and Forwarding (VRF) instance.
VRFexport
Adds routes from this VRF to interfaces on other VRFs.
Configure VRF for GRE tunnel interfaces
For GRE tunnel interfaces, these parameters are on Configuration > Network > Interfaces > GRE>
Tunnel n:
VRF
Associates the interface with a particular VRF. .
Destination VRF
Associates the interface with a particular destination VRF. .
Command line
Command Instance Parameter Values Equivalent web parameter
eth n vrf integer VRF
eth n vrfexport integer VRFexport
tun n vrf integer VRF
tun n vrfdest integer Destination VRF
ppp n vrf integer VRF
ppp n vrfexport integer VRFexport