Digi TransPort WR11 - Set System Date and Time Automatically Using an SNTP Server

Configuring system settings Set system date and time
Digi TransPort® Routers User Guide
712
Day
The day on which to switch to daylight saving time.
Hour
The hour at which to switch to daylight saving time.
End
Month
The desired month in which to switch back to GMT (UTC).
Day
The desired day on which to switch back to GMT.
Hour
The desired hour at which to switch back to GMT.
3. Click Apply.
Set system date and time automatically using an SNTPserver
You can configure the router to have its system date and time set automatically by an SNTP server.
SNTP continually polls an external NTP time server on either a private company network or the
internet at a configured interval rate.