Digi TransPort WR11 - Page 713

Configuring system settings Set system date and time
Digi TransPort® Routers User Guide
713
É Web
1. Go to Configuration >System > Date and Time > Autoset Date and Time.
2. Select Use SNTP to auto-set the system time. The SNTPserver parameters appear:
3. Configure the SNTP server parameters:
SNTP server
The hostname or IP address of the desired SNTP server.
Authorisation key #
The SNTPauthorization request key number. SNTP allows for authenticating SNTP requests
and responses with a key. These SNTPrequests include a key # field allowing the SNTPserver
can look up the appropriate key to use in performing the authorization.
Authorisation key
The key to associate with the configured authorization key number.
Check on Power-Up
When checked, causes the router to attempt to connect to the SNTP server every time it
boots.
Update every h hours
The interval, in hours, the router should wait between updating the system clock.