Hardware features TransPort WR31 hardware features
Digi TransPort® Routers User Guide
45
TransPort WR31 hardware features
1. SIM card slot cover: On the underside of the router. Remove and replace with a Phillips-head
screwdriver.
2. SIM 1 and SIM 2 card slots: On the underside of the router. SIM 1 and SIM 2 are for use with .
When inserting the SIM card(s) into SIM sockets, SIM 1 is toward the middle of the router, and
SIM 2 is toward the outside of the router. In both cases, the end of the SIM card with the
chamfered corner should be inserted first.
3. LAN 0 port: This RJ45 port connects the router to a 10/100 base-TLAN. The port is auto-
sensing for speed and wiring (straight-through or cross-over).
4. LAN 1 port: This RJ45 port connects the router to a 10/100 base-TLAN. The port is auto-
sensing for speed and wiring (straight-through or cross-over).
5. USB host connector: Connects compatible USB 2.0 client devices such as memory sticks, and
serial adapters. The total current available to power USB devices is 0.5 A.
WARNING! The USB port is for use in a normal location only, not a hazardous
location.
6. Reset button: Returns the router to its factory default settings. See Reset the router to
factory defaults.
To Next Page
Loading...
