Digi TransPort WR11 - Configure SSL Clients

Configuring Secure Sockets Layer (SSL) Configure SSL clients
Digi TransPort® Routers User Guide
539
Configure SSL clients
É Web
1. Go to Configuration > Network > SSL. The SSLClients section of the page has a table with
columns and parameters as follows:
2. Configure the SSLclient parameters:
SSL Client
A list of the SSL client numbers supported by the router.
Client Certificate Filename
The name of the required certificate file is selected from those available on the router’s filing
system from this drop-down list.
Allow Insecure Ciphers
Allows use of 'insecure' Cipher-Block Chaining (CBC)-based ciphers. The default value is On.
Client Private Key Filename
The name of the file that contains the private key that matches the public key stored in the
above parameter, is selected from this drop-down list.
Cipher List
The cipher list in this text box is a list of one or more cipher strings separated by colons.
Commas or spaces are also accepted as separators but colons are normally specified. The
actual cipher string can take several different forms. It can consist of a single cipher suite such
as RC4-SHA. It can represent a list of cipher suites containing a certain algorithm or cipher
suites of a certain type. For example, SHA1 represents all cipher suites using the SHA1 digest
algorithm. Lists of cipher suites can be combined in a single cipher string using the + character.
This forms the logical AND operation. For example, SHA1+DES represents all cipher suites
containing SHA1 and DES algorithms. If left empty, router does not use the cipher list.
For more information see https://www.openssl.org /docs/man1.0.2/apps/ciphers.html.