Configuring time bands Enable and disable time bands for a PPP or Wi-Fi interface
Digi TransPort® Routers User Guide
580
Enable and disable time bands for a PPP or Wi-Fi interface
É
Web
1. Go to Configuration > Network > Timebands. Enabling and disabling time bands for a
particular PPP or Wi-Fi interface instance is controlled by the settings in a table with the
following columns:
2. Set the time band parameters as needed
Interface
Lists the available PPP instances.
Enable
This column contains checkboxes; each checkbox controls whether or not time bands are
enabled for the PPP instance in the left-hand column of the row. Check the checkbox to enable
time bands for the associated PPP instance.
To Next Page
Loading...
