Digi TransPort WR11 - Configure Advanced DHCP Parameters

Configuring DHCP servers Configure advanced DHCP parameters
Digi TransPort® Routers User Guide
401
Configure advanced DHCP parameters
É Web
1. Go to Configuration > Network > DHCP Server >DHCPServer for Ethernet n > Advanced.
2. Set advanced DHCPparameters:
Next Bootstrap Server a.b.c.d
The IP address of a secondary configuration server. This server does not have to be on the
same logical subnet as the client.
Server Hostname
The name of a host that the DHCP client can make contact with in order to download a boot
file.
Boot file
The name of the boot file the client can download from the host specified in the Server
Hostname text box.
Send unicast responses
If enabled, sends unicast responses to DHCP clients from the DHCP server.
3. Click Apply.
Command line
Command Instance Parameter Values Equivalent web parameter
dhcp n nxtsvr Valid IP address a.b.c.d Next Bootstrap Server
dhcp n sname Up to 64 characters Server Hostname
dhcp n file Up to 64 characters Boot file