Digi TransPort WR11 - Transport WR44 Additional Hardware Features

Hardware features TransPort WR44 / WR44 R hardware features
Digi TransPort® Routers User Guide
80
TransPort WR44 additional hardware features
1. ASY serial port (3x): Provides three additional asynchronous RS232 serial ports using RJ45
connectors.
2. SYN/ASYN serial port: Provides an X.21/RS422/RS232 synchronous / asynchronous serial port
using a DB25 connector.
3. GPS antenna connector (GPS models only): Provides GPS capabilities using an SMA male
connector.
4. ISDN: Provides an ISDN Basic Rate Interface (BRI) via an RJ45 port. This can be configured
either as a TE (terminal endpoint) or as NT-1 (network termination). The option also includes
an additional asynchronous serial port via a second RJ45 port.
5. Telemetry 1 I/O interface: Provides 4 opto-isolated digital input ports and 1 opto-isolated
digital output port. It also provides a relay I/O port, a voltage monitoring port, and internal
temperature monitoring.
6. Telemetry 2 I/O interface: Provides 4 isolated analog I/O ports and 4 non-isolated digital I/O
ports.