Configuring network interfaces Configure mobile (cellular) interfaces
Digi TransPort® Routers User Guide
226
Configure mobile connection settings
Select the service plan and connection settings for connecting to the mobile network.
ÉWeb
1. Go to Configuration > Network > Interfaces > Mobile > Mobile Settings. The Mobile
Settings page has several groups of settings. These settings vary depending on the cellular
module in your router.
2. Configure the mobile service provider settings:
Service Plan / APN
Enter an Access Point Name (APN) to overwrite the built-in default.
Select APN automatically
Only available for routers with one of the following module types:
n SIERRA_LTE
n TELIT_LTE
n TELIT_LTE_V2
For more information, see Automatic APN selection.
SIM PIN (optional)
Some SIM cards are locked with a Personal Identification Number (PIN) code to prevent
misuse if they are lost or stolen. The cellular service provider should be able to confirm if the
SIM requires a PIN code. If you enter a PIN code in this field, the router will try to unlock the
SIM before attempting to connect to the network.
Confirm SIM PIN
Enter the PIN again in this field to confirm it.
To Next Page
Loading...
