Digi TransPort WR11 - Change the Default Username and Password for a User

Configuring security Configure user security settings
Digi TransPort® Routers User Guide
758
Change the default username and password for a user
By default, the username for each supported user is username and the password is password. To
increase security, change the username and password for device users from these defaults.
Note Record the new password. If the changed password is lost, the router must be reset to the
default firmware settings.
ÉWeb
1. From the main menu, navigate to Configuration > Security> Users> User n.
2. In the Username field, enter the new user name. Up to 14 characters are allowed in a
username. .
3. In the Password / Confirm Password field, enter the new password.
4. Select the access level for the user: Super, High, Medium, Low, Read Only, or None.
5. Click Apply.
Command line
Issue several user commands, specifying the name, password, and accessparameters.