Digi TransPort WR11 - Set System Date and Time Automatically Using an NTP Server

Configuring system settings Set system date and time
Digi TransPort® Routers User Guide
714
Update randomly between s1 and s2 seconds
It is possible to use a random update interval rather than a fixed interval. There are two text-
entry boxes for this purpose. Enter the minimum interval into the left-hand box, and the
maximum desired interval into the right-hand box. Selecting the random update clears the
fixed interval.
Offset from GMT
This parameter should be set to + or - the number of hours the router’s time should be ahead
or behind Greenwich Mean Time.
4. Click Apply.
Set system date and time automatically using an NTPserver
You can configure the router to have its system date and time set automatically by an NTP server.