Digi TransPort WR11 - Configure Global Wi-Fi Settings

Configuring network interfaces Configure Wi-Fi interfaces
Digi TransPort® Routers User Guide
209
Configure global Wi-Fi settings
Because of national restrictions on the channels available for use, the correct country should be
selected from the drop down list to restrict the channels that are legal to use by the router. If
required, a specific channel can be selected to override the auto selection. The Antenna setting is not
available on some but not all TransPort WR routers.
ÉWeb
1. Go to Configuration > Network >Interfaces > Wi-Fi > Global Wi-Fi Settings.
2. Configure global Wi-Fi settings:
Country
Selecting a country from the drop down list restricts the channels that the router will use. See
for more info on licensed channels.
Network Mode
Select your chosen mode of operation from the drop down list. The available options vary by
router, and some operation modes may not be available on some models.
Channel
Selecting Auto allows the router to scan for a free channel within the range of legal channels
for the selected country. It is possible to manually select a specific channel to use, but make
sure the selected channel is legal to use in the country.
3. Click Apply.