Managing networks and connections Show network interface status
Digi TransPort® Routers User Guide
831
Show Wi-Fi status and statistics
ÉWeb
Go to Management > Network Status > Interfaces > WiFi >WiFi n.
Module Detected
Indicates that the Wi-Fi hardware has been detected by the router.
Admin Status
The current administrative state of the Wi-Fi interface. It indicates whether there is sufficient
configuration to bring the Wi-Fi interface up. It can be either Up or Down.
Operational Status
The current operational state of the Wi-Fi interface. It can be either Up or Down.
Channel Mode
The Wi-Fi channel mode in use. The possible values for this parameter are A, A/N, A/N/AC, B/G, B/G/N.
Channel
The Wi-Fi channel in use.
Bytes Received
The number of bytes received on the Wi-Fi interface.
Bytes Sent
The number of bytes sent on the Wi-Fi interface.
Packets Received
The number of packets received on the Wi-Fi interface.
Packets Sent
The number of packets sent on the Wi-Fi interface.
Receive Errors
The number of receives errors that have occurred on the Wi-Fi interface.
Transmit Errors
The number of transmit errors that have occurred on the Wi-Fi interface.
Received Packets Dropped
The number of received packets that have been dropped on the Wi-Fi interface.
Wi-Fi Client Connections table
The Wi-Fi Client Connections table gives information on the Wi-Fi clients that are connected to the
router’s Wi-Fi Access Point interface.
To Next Page
Loading...
