Digi TransPort WR11 - Page 266

Configuring network interfaces Configure DSL interfaces
Digi TransPort® Routers User Guide
266
Command Instance Parameter Values Equivalent web parameter
adsl 0 usefwfile on, off Load DSL firmware from flash
file
adsl 0 watchdog on, off Enable watchdog
apvc 0 oammanage on, off Manage this PVC using ATM
OAM cells
Additional CLI commands
The following command is not available from the web interface:
adsl 0 debug { 0| 1}
Where 0 is off and 1 causes debugging information to be sent to the CLI.