Digi TransPort WR11 - Page 551

Configuring Secure Shell (SSH) server and client Configure the SSH client
Digi TransPort® Routers User Guide
551
Command Instance Parameter Values
Equivalent
web
parameter
sshcli 0-7 idfile Up to 12 characters (8.3
format)
Key file to use
as the regular
SSH client.
sshcli 0-7 idrsafile Up to 12 characters (8.3
format)
Name of
either an SSH
V1 or SSH V2
host key.
sshcli 0-7 idrsafile1 Up to 12 characters (8.3
format)
Name of
either an SSH
V1 or SSH V2
host key.
sshcli 0-7 comp 0=disabled Use Deflate
compression,
level.
sshcli 0-7 pubkeyauth 0=disabled Enables SSH
public-key
authentication
to connect to
OpenSSH.
sshcli 0-7 pwdauth 0=disabled Enables SSH
password
authentication
to connect to
OpenSSH.
sshcli 0-7 enc3descbc 0-2147483647
0=Disabled
3DES.
sshcli 0-7 encaes128cbc 0-2147483647 AES (128 bits).
sshcli 0-7 encaes192cbc 0-2147483647 AES (192 bits).
sshcli 0-7 encaes256cbc 0-2147483647 AES (256 bits).
sshcli 0-7 macmd5 0-2147483647 MAC MD5.
sshcli 0-7 macmd596 0-2147483647 MAC MD5-96.
sshcli 0-7 macsha1 0-2147483647 MAC SHA1.
sshcli 0-7 macsha196 0-2147483647 MAC SHA1-96.