Configuring alarms Configure events to trigger alarms
Digi TransPort® Routers User Guide
695
Command line
Command Instance Parameter Values
Equivalent web
parameter
event n syslog_trig 0-9 Send a Syslog
message when the
event priority is at
least n.
event n syslog_max 0-2147483647 Send a maximum
of n Syslog
messages per day.
Configure the Syslog server to which messages are sent
ÉWeb
Go to Configuration > Alarms > Event Settings >Syslog Server n.
Syslog Server IP Address
The IP address of the server.
Port
The port to use.
Note The following three items (Mode, TCP timeout, and Route) only appear on routers with
TCP logging software option enabled, which is not a common option.
To Next Page
Loading...
