Digi TransPort WR11 - Page 741

Configuring remote management Use Digi Remote Manager to manage devices
Digi TransPort® Routers User Guide
741
Assume connection is lost after n timeouts
Occasional packet loss is to be expected. This parameter allows for a specified number of lost
keep-alive packets before the connection is deemed to have failed.
4. Configure the Ethernet Settings, as needed.
Receive Interval s seconds
The time between keep-alive packets that the router should wait before considering that the
connection may be lost.
Transmit Interval s seconds
The interval between transmission of keep-alive packets.
Assume connection is lost after n timeouts
Occasional packet loss is to be expected. This parameter allows for a specified number of lost
keep-alive packets before the connection is deemed to have failed.
5. Click Apply.
Command line
cloud command
Command Instance Parameter Values Equivalent web parameter
cloud 0 use_proxy on, off Connect using a proxy
cloud 0 proxy_port port
number
Proxy Port
cloud 0 proxy_url URL string Proxy URL
cloud 0 idledisconn 0, 1 Disconnect when Remote Manager server is
idle
0=Do not disconnect
1=Disconnect
cloud 0 disconnsecs 0-28800 Idle Timeout h,m,s
This CLI value is entered in seconds only.
cloud 0 ppprxkeepalive 0-28800 WAN - Receive Interval seconds.
cloud 0 ppptxkeepalive 0-28800 WAN - Transmit Interval seconds.
cloud 0 pppwaitfor 1-255 WAN - Assume connection is lost after n
timeouts.
cloud 0 ethrxkeepalive 0-28800 Ethernet - Receive Interval seconds.
cloud 0 ethtxkeepalive 0-28800 Ethernet - Transmit Interval seconds.
cloud 0 ethwaitfor 1-255 Ethernet - Assume connection is lost after n
timeouts.