Digi TransPort WR11 - Page 803

Configuring security Use a RADIUS client for authentication
Digi TransPort® Routers User Guide
803
Confirm Password
Type the above password into this text box so that the router can determine if the two are
identical.
3. Click Apply.
Command line
Command Instance Parameter Values Equivalent web parameter
radcli 0, 1 server Valid IP
Address
a.b.c.d
Primary Authorization Server
IP Address
radcli 0, 1 nasid Up to 80
characters
Primary Authorization Server
NAS ID
radcli 0, 1 password Up to 40
characters
Primary Authorization Server
Password
radcli 0, 1 server2 Valid IP
Address
a.b.c.d
Secondary Authorization Server
IP Address
radcli 0, 1 nasid2 Up to 80
characters
Secondary Authorization Server
NAS ID
radcli 0, 1 password2 Up to 40
characters
Secondary Authorization Server
Password
radcli 0, 1 localauth off, on
Default: on
Enable local authorization if there is
no response from the authorization
server(s)
radcli 0, 1 aserver Valid IP
Address
a.b.c.d
Primary Accounting Server
IP Address
radcli 0, 1 anasid Up to 80
characters
Primary Accounting Server
NAS ID
radcli 0, 1 apassword Up to 40
characters
Primary Accounting Server
Password
radcli 0, 1 aserver2 Valid IP
Address
a.b.c.d
Secondary Accounting Server
IP Address
radcli 0, 1 anasid2 Up to 80
characters
Secondary Accounting Server
NAS ID
radcli 0, 1 apassword2 Up to 40
characters
Secondary Accounting Server
Password