EasyManua.ls Logo

Digi TransPort WR11 - Page 836

Digi TransPort WR11
948 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Managing networks and connections Show network interface status
Digi TransPor Routers User Guide
836
SIM Status
This indicates whether or not a valid SIM card has been installed in the router. It may be one of the
following
n READY: SIM is OK.
n SIM PIN: PIN number required.
n SIM PUK: SIM blocked (unblocking code required).
n ERROR: SIM is not installed or is faulty.
Signal strength
The signal strength in dBm being received by the mobile module. The range is -113dBm (min) to -
51dBm (max). The signal strength bars should match the Signal Strength LEDs on the front of the
router.
Radio technology
The current network technology in use. It may be one of the following
n GSM
n GPRS
n EDGE
n UMTS
n HSDPA
n HSUPA
n CDMA
Signal quality
A measure of the signal level of the cellular network, measured in dB.
Radio band
The radio band on which the cellular modem is operating.
Channel
The radio channel on which the cellular modem is operating.
Manufacturer
The manufacturer of the mobile module.
Model
The model of the mobile module.
IMEI
The International Mobile Equipment Identification (IMEI) of the mobile module.
ESN
The Electronic Serial Number (ESN) of the mobile module.
MEID
The Mobile Equipment Identifier (MEID) of the mobile module.

Table of Contents

Other manuals for Digi TransPort WR11

Related product manuals