Digi TransPort WR11 - Page 847

Managing networks and connections Show network interface status
Digi TransPort® Routers User Guide
847
Receive Errors
The number of frames received that contain an error (CRC etc).
Transmit Errors
The number of frames the interface attempted to transmit, but were found to contain an error.
Refresh
Updates the statistics on the page.
Clear PPP n Statistics
Reset the statistics to 0.
Command line
The command to display the PPP status is:
pppst at <n>
where <n> is the interface number for the PPP interface assigned to the PSTN module and is shown
at the top of the web page. For descriptions of the pppstat output, see Show PPP status and
statistics.