EasyManua.ls Logo

Digi TransPort WR11 - Page 851

Digi TransPort WR11
948 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Managing networks and connections Show network interface status
Digi TransPor Routers User Guide
851
Name
The name assigned to the PPP interface.
Uptime
The amount of time the PPP interface has been up.
MRU
The maximum receive unit (MRU) that has been negotiated by each peer on the PPP connection.
ACCM
The Asynchronous Control Character Map (ACCM) that has been negotiated by each peer on the PPP
connection.
VJ Compression
The Van Jacobson (VJ) compression that has been negotiated by each peer on the PPP connection.
Link with Active Entity
The entity this PPP interface is using for connectivity.
IP Address
The IP address assigned to this PPP interface. This could be either statically configured or assigned by
the remote PPP peer.
DNS Server IP Address / Secondary DNS Server IP Address
The primary and secondary DNS server IP addresses the PPP interface is using.
Outgoing Call To
If this is dial-out PPP interface, this is the number for making the call.
Total Data Transferred
The total amount of data bytes received and transmitted on the PPP interface, including PPP headers
and payload.
Total Up Time Today
The total amount of time, in minutes, the PPP interface has been connected in the current 24-hour
period.
Bytes Received
The number of bytes received on the PPP interface.
Bytes Sent
The number of bytes sent on the PPP interface.
LCP Packets Received
The number of Link Control Protocol (LCP) packets received on the PPP interface.
LCP Packets Sent
The number of Link Control Protocol (LCP) packets sent on the PPP interface.

Table of Contents

Other manuals for Digi TransPort WR11

Related product manuals