dSPACE DS1103 - Page 79

The illustration below shows the status LEDs for one pair of
fiber‑optic and patch cable connectors.
Status LEDs
Yellow LED
(patch cable
connector)
Green LED
Red LED
Yellow LED
(fiber-optic
connector)
Fiber-optic
connector
Patch cable
connector
PC Box1
LEMO
connector
Green power LEDs
Yellow LED (fiber‑optic connector) Lit if the host PC and the
corresponding dSPACE box are currently used for communication.
Red LED Lit if a fiber‑optic cable is used.
Green LED Lit when data is being sent or received.
Yellow LED (patch cable connector) Lit if the connection to the
host PC or a connected dSPACE box is ready for communication.
Green power LEDs Lit both when power is supplied correctly to the
DS830.
HowTos
• How to Connect the DS830 on page 76
Related topics
s
Connecting dSPACE Boxes to the Host PC via DS830
t
DS1103 Hardware Installation and Configuration November 2014
79
t