dSPACE DS1103 User Manual

To connect an expansion box via Ethernet, follow the instructions
given in the flow chart below. The boxes in the flow chart refer to the
corresponding sections in the text.
Preparing the
TCP/IP Protocol
How to Set Up the TCP/IP Protocol
How to Set Up a Peer-to-Peer
Connection
Integrating the Expansion
Box into a Network
How to Change the IP Address
of the Expansion Box
How to Restore the TCP/IP
Configuration of the PC
How to Connect the Expansion
Box to the Network and
Test the Connection
Yes
No
How to Set Up a
Peer-to-Peer Connection
Connecting an Expansion
Box via Ethernet
Integrate
the Expansion
Box into an Existing
Network?
Expansion Box
Ready for Use
Setup procedure
Information in this section
Preparing the TCP/IP Configuration 84
Setting Up a Peer-to-Peer Connection 85
Integrating the Expansion Box into a Network 87
Where to go from here
s
Setting Up The Ethernet Connection
t
DS1103 Hardware Installation and Configuration November 2014
83
t

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English