dSPACE DS1103 - Page 96

7 Turn on the expansion box.
To avoid unpredictable errors, you should always turn
on the expansion box before the DS830 MultiLink Panel
(if used) and the host PC.
8 If used, turn on the DS830 MultiLink Panel.
9 Turn on the host PC.
The host PC should boot as usual.
10 Turn on all external devices connected to the dSPACE system.
HowTos
• How to Connect External Devices to a Board on page 93
Related topics
s
Connecting External Devices to the dSPACE System
t
96
s
DS1103 Hardware Installation and Configuration November 2014