Multi-functional corner knife station
164 Service Instructions 755 A/756 A - 00.0 - 02/2019
22.1.1 Setting the initial position of the corner knives
Fig. 161: Setting the initial position of the corner knives
Information
To precisely set the position of the corner knives, start by bringing all
4 corner knives to an initial position.
To set the initial position of the corner knives:
1. Unplug the corner knife supports with the locking pin (1).
 The corner knives are positioned correctly when the locking pin (1)
is fully inserted in the mark-off hole.
(1) - Locking pin