About these instructions
Service Instructions 755 A/756 A - 00.0 - 02/2019 9
1.3 Other documents
The machine includes components from other manufacturers. Each
manufacturer has performed a hazard assessment for these purchased
parts and confirmed their design compliance with applicable European
and national regulations. The proper use of the built-in components is
described in the corresponding manufacturer's instructions.
1.4 Liability
All information and notes in these instructions have been compiled in
accordance with the latest technology and the applicable standards and
regulations.
Dürkopp Adler cannot be held liable for any damage resulting from:
• Breakage and damage during transport
• Failure to observe these instructions
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Use of unapproved parts
Transport
Dürkopp Adler cannot be held liable for breakage and transport damages.
Inspect the delivery immediately upon receiving it. Report any damage
to the last transport manager. This also applies if the packaging is not
damaged.
Leave machines, equipment and packaging material in the condition in
which they were found when the damage was discovered. This will ensure
any claims against the transport company.
Report all other complaints to Dürkopp Adler immediately after receiving
the product.
To Next Page
Loading...
Need help?
General
