Middle knife
Service Instructions 755 A/756 A - 00.0 - 02/2019 81
10.2 Setting the middle knife
Fig. 84: Setting the middle knife (1)
To set the middle knife:
Changing the middle knife
1. Loosen the screws (5).
2. Pull the middle knife (4) down and out of its holder.
3. Slide a new middle knife into the holder as far as it will go.
4. Tighten the screws (5).
Setting the middle knife to parallel position
5. Loosen the screw (6).
6. Set the middle knife (4) sideways.
 The middle knife (4) abuts with its blade on the counter blade.
7. Tighten the screw (6).
Setting the middle knife to the cutting position
8. Loosen the screw (2).
9. Rotate the middle knife (4) sideways.
 The middle knife (4) is in slight cutting position in relation to the knife
in the throat plate.
10. Tighten the screw (2).
(1) - Screw
(2) - Screw
(3) - Middle knife guard
(4) - Middle knife
(5) - Screws
(6) - Screws
To Next Page
Loading...
Need help?
General
