DURKOPP ADLER 755 A User Manual

Maintenance
Service Instructions 755 A/756 A - 00.0 - 02/2019 437
30 Maintenance
This chapter describes maintenance work that needs to be carried out
on a regular basis to extend the service life of the machine and achieve
the desired seam quality.
Maintenance intervals
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Work to be carried out Operating hours
8 40 160 500
Machine head
Remove fluff, lint and thread remnants 
Check the oil level 
Check the hook lubrication 
Check the lenses of the remaining thread monitor 
Clean the reflecting foils 
Pneumatic system
Check the water level in the pressure controller 
Check the filter element in the maintenance unit 
Check the tightness of the system 
Drive units and transport carriage
Check state and tension of the toothed belts 

DURKOPP ADLER 755 A Specifications

General

Brand	DURKOPP ADLER
Model	755 A
Category	Sewing Machine
Language	English