Folder
Service Instructions 755 A/756 A - 00.0 - 02/2019 109
17.5 Setting the stroke movement for the folder
Fig. 113: Setting the stroke movement for the folder (1)
Proper setting
When the folder is lowered
The plate cam (1) is set such that the folder is first raised vertically by
approx. 20 mm when swiveling up before being swung out of the sewing
area.
When the folder is raised
When the folder is raised, there must be some clearance between
the guide roller (3) and the highest point of the guide groove (2).
(1) - Plate cam
(2) - Guide groove
(3) - Guide roller
To Next Page
Loading...
Need help?
General
