CONFIDENTIAL
SHEET
167
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
168
Second byte (printer information)
Bit Off/On Hex Decimal Status for ASB
0 - - - Undefined.
1 - - - Undefined.
2 Off 00 0 No mechanical error.
On 04 4 Mechanical error occurred.
3 Off 00 0 No auto cutter error.
On 08 8 Auto cutter error occurred.
4 Off 00 0 Not used. Fixed to Off.
5 Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurred.
6 Off 00 0 No automatically recoverable error.
On 40 64 Automatically recoverable error occurred.
7 Off 00 0 Not used. Fixed to Off.
Bit 2: Mechanical error indicates the home position detection error, carriage detection
error, slip paper ejection error, or slip cover open error during printing.
Bit 2 and 3: If these errors occur due to paper jams or the like, it is possible to recover by
correcting the cause of the error and executing
DLE ENQ
n
(1 £
n
£ 2). If an error
due to a circuit failure (e.g. wire break) occurs, it is impossible to recover.
Bit 6: When printing is stopped due to high print head temperature until the print head
temperature drops sufficiently or when the paper roll cover is open during printing,
bit 6 is On.
To Next Page
Loading...
