CONFIDENTIAL
SHEET
9
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
10
[ All the numeric values are typical. ]
Area where recognition is impossible.
49.0 (1.93")
TEST SAMPLE
EPSON
Pay to the
order of
19
$
90-7172/132
3222
9 2 5
Dollars
Figure 1.1.7 MICR Character Recognition Impossible Area of Personal Check
NOTES:
1. Do not install the printer near any magnetic fields because this may cause MICR reading
errors.
2. The MICR characters may not be recognized when impact or vibration is applied to the
printer.
4) Notes on using the MICR reader (only when the printer is used with MICR)
· The personal checks must be flat, without curls, folds, or wrinkles (especially at the
edges). Otherwise, the check may rub against the ribbon and become ink-stained.
· Do not insert checks that have clips or staples. This may cause paper jams, MICR
reading errors, and damage to the MICR head.
· Let go of the check immediately as soon as the printer starts feeding it. Otherwise, the
paper is not fed straight, causing paper jams and MICR reading errors.
Area where recognition is impossible.