Paper Is Smeared or
Scued
e following causes can be considered.
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 392
& “Unavailable Paper Types” on page 395
Paper is loaded incorrectly.
Solutions
When horizontal banding (perpendicular to the printing direction) appears, or the top or bottom of the
paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper.
& “Loading Paper” on page 37
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not
load above the line indicated by the triangle symbol on the edge guide.
& “Available Paper and Capacities” on page 392
The paper is curled.
Solutions
Place the paper on a at surface to check if it is curled. If it is, atten it.
Paper is wet.
Solutions
Check the paper condition. If paper absorbs moisture, it becomes wavy or curls that may cause the
trouble.
Old paper is used.
Solutions
If papers are smeared or scued frequently, try using newly opened papers.
Solving Problems
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
Print Quality is Poor
284
To Next Page
Loading...
Need help?
General
