Epson WorkForce Enterprise WF-C21000 Series - Page 375

Note:
On the Web Cong screen, you can nd the menu below.
Fax tab > Basic Settings
Expansion Line Settings:
G3-2:
❏ Fax Speed
❏ ECM
❏ Dial Tone Detection
❏ Dial Mode
❏ Line Type
❏ Your Phon e Nu mbe r
❏ Rings to Answer
G3-3:
❏ Fax Speed
❏ ECM
❏ Dial Tone Detection
❏ Dial Mode
❏ Line Type
❏ Your Phon e Nu mbe r
❏ Rings to Answer
e functions for each item are the same as for standard faxing. See "Related Information" below for
details on each item.
Transmission Setting By Line:
G3-1:
Select an option for standard line G3-1 according to how it will be used (sending only,
receiving only, or sending and receiving). When any optional fax board is not installed
(standard faxing only), this corresponds to Sending and Receiving.
G3-2:
Select an option for extension line G3-2 according to how it will be used (sending only,
receiving only, or sending and receiving).
G3-3:
Select an option for extension line G3-3 according to how it will be used (sending only,
receiving only, or sending and receiving).
Using Optional Items > Super G3/G3 Multi Fax Board > Fax Settings Menu (When Optional Fax Boards Installed)
375